ERGO packages

Grab the repository key using this command: wget -O - | sudo apt-key add - or wget -O - > ergo.gpg then run sudo apt-key add ergo.gpg Open /etc/apt/sources.list in nano using the command sudo nano /etc/apt/sources.list and add the line: deb stable/ (use ctrl+X to exit nano) run sudo apt-get update && sudo apt-get install ergo-telescope create a file named unit_id in /etc/ERGO using nano sudo nano /etc/ERGO/unit_id and add your unit number to it. your unit number here and then either reboot or run command: sudo service ergo-telescope restart the GPS must have lock or you will not see any events added to the file in /etc/ERGO/ERGO_DATA.csv To look at the data use tail –f /etc/ERGO/ERGO_DATA.csv If you would like your unit to update automatically: run sudo apt-get install unattended-upgrades apt-listchanges then run sudo dpkg-reconfigure –plow unattended-upgrades and you have to edit /etc/apt.conf.d/50unatended-upgrades using nano and add the line: “,a=stable”; sudo nano /etc/apt.conf.d/50unatended-upgrades run sudo apt-get update KEY: Anything not bolded or in italics is a command or a file path.